No puede seleccionar más de 25 temas Los temas deben comenzar con una letra o número, pueden incluir guiones ('-') y pueden tener hasta 35 caracteres de largo.

hace 5 años
hace 4 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 4 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
hace 5 años
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354
  1. #!/bin/sh
  2. command -V gpg >/dev/null 2>&1 && GPG="gpg" || GPG="gpg2"
  3. [ -z ${PASSWORD_STORE_DIR+x} ] && PASSWORD_STORE_DIR="$HOME/.password-store"
  4. [ -r "$PASSWORD_STORE_DIR/.gpg-id" ] &&
  5. "$GPG" --list-secret-keys $(cat "$PASSWORD_STORE_DIR/.gpg-id") >/dev/null 2>&1 || {
  6. printf "\`pass\` must be installed and initialized to encrypt passwords.\\nBe sure it is installed and run \`pass init <yourgpgemail>\`.\\nIf you don't have a GPG public private key pair, run \`%s --full-gen-key\` first.\\n" "$GPG"
  7. exit
  8. }
  9. ! command -v mbsync >/dev/null && printf "\`mbsync (isync package)\` must be installed to run mutt-wizard.\\n" && exit
  10. prefix="/usr/local"
  11. muttdir="$HOME/.config/mutt" # Main mutt config location
  12. accdir="$muttdir/accounts" # Directory for account settings
  13. maildir="$HOME/.local/share/mail" # Location of mail storage
  14. namere="^[a-z_][a-z0-9_-]*$" # Regex to ensure viable username
  15. emailre=".\+@.\+\\..\+" # Regex to confirm valid email address
  16. muttshare="$prefix/share/mutt-wizard"
  17. mbsyncrc="$HOME/.mbsyncrc"
  18. mwconfig="$muttshare/mutt-wizard.muttrc"
  19. cachedir="$HOME/.cache/mutt-wizard"
  20. muttrc="$muttdir/muttrc"
  21. msmtprc="$HOME/.config/msmtp/config"
  22. ssltype="IMAPS" # This is later changed to `None` later in the script if using Protonmail
  23. for x in "/etc/ssl/certs/ca-certificates.crt" "/etc/pki/tls/certs/ca-bundle.crt" "/etc/ssl/ca-bundle.pem" "/etc/pki/tls/cacert.pem" "/etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem" "/etc/ssl/cert.pem" "/usr/local/share/ca-certificates/"
  24. do
  25. [ -f "$x" ] && sslcert="$x" && break
  26. done || { echo "CA Certificate not found. Please install one or link it to /etc/ssl/certs/ca-certificates.crt" && exit 1 ;}
  27. getaccounts() { accounts="$(find "$accdir" -type f | grep -o "[0-9]-.*.muttrc" | sed "s/-/: /;s/\..*//" | sort -n)" ;}
  28. list() { getaccounts && [ -n "$accounts" ] && echo "$accounts" ;}
  29. getprofiles() { \
  30. unset msmtp_header msmtp_profile mutt_profile mbsync_profile
  31. printf "Creating profiles for \`%s\`..." "$title"
  32. msmtp_header="defaults
  33. auth on
  34. tls on
  35. tls_trust_file $sslcert
  36. logfile ~/.config/msmtp/msmtp.log
  37. "
  38. msmtp_profile="account $title
  39. host $smtp
  40. port $sport
  41. from $fulladdr
  42. user $login
  43. passwordeval \"pass mutt-wizard-$title\"
  44. $starttlsoff
  45. "
  46. mbsync_profile="IMAPStore $title-remote
  47. Host $imap
  48. Port $iport
  49. User $login
  50. PassCmd \"pass mutt-wizard-$title\"
  51. AuthMechs LOGIN
  52. SSLType $ssltype
  53. CertificateFile $sslcert
  54. MaildirStore $title-local
  55. Subfolders Verbatim
  56. Path ~/.local/share/mail/$title/
  57. Inbox ~/.local/share/mail/$title/INBOX
  58. Flatten .
  59. Channel $title
  60. Expunge Both
  61. Master :$title-remote:
  62. Slave :$title-local:
  63. Patterns * !\"[Gmail]/All Mail\"
  64. Create Both
  65. SyncState *
  66. MaxMessages $maxmes
  67. ExpireUnread no
  68. # End profile
  69. "
  70. if [ "$accounttype" = "offline" ]; then
  71. mutt_profile="# vim: filetype=neomuttrc
  72. # muttrc file for account $title
  73. set realname = \"$realname\"
  74. set from = \"$fulladdr\"
  75. set sendmail = \"msmtp -a $title\"
  76. alias me $realname <$fulladdr>
  77. set folder = \"$maildir/$title\"
  78. set header_cache = $cachedir/$title/headers
  79. set message_cachedir = $cachedir/$title/bodies
  80. set mbox_type = Maildir
  81. set crypt_autosign = yes
  82. set crypt_opportunistic_encrypt = yes
  83. set pgp_self_encrypt = yes
  84. set pgp_default_key = $keyid
  85. bind index,pager gg noop
  86. bind index,pager g noop
  87. bind index,pager M noop
  88. bind index,pager C noop
  89. bind index gg first-entry
  90. macro index o \"<shell-escape>mbsync -V $title<enter>\" \"run mbsync to sync $title\"
  91. unmailboxes *
  92. "
  93. else
  94. mutt_profile="# vim: filetype=neomuttrc
  95. # muttrc file for account $title
  96. set realname = \"$realname\"
  97. set from = \"$fulladdr\"
  98. set sendmail = \"msmtp -a $title\"
  99. alias me $realname <$fulladdr>
  100. set folder = \"imaps://$login@$imap:$iport\"
  101. set imap_user = \"$login\"
  102. set header_cache = $cachedir/$title/headers
  103. set message_cachedir = $cachedir/$title/bodies
  104. set imap_pass = \"\`pass mutt-wizard-$title\`\"
  105. set crypt_autosign = yes
  106. set crypt_opportunistic_encrypt = yes
  107. set pgp_self_encrypt = yes
  108. set pgp_default_key = $keyid
  109. set mbox_type = Maildir
  110. set ssl_starttls = yes
  111. set ssl_force_tls = yes
  112. bind index,pager gg noop
  113. bind index,pager g noop
  114. bind index,pager M noop
  115. bind index,pager C noop
  116. bind index gg first-entry
  117. unmailboxes *
  118. "
  119. fi
  120. printf "DONE.\\n"
  121. }
  122. askinfo() { \
  123. printf "Insert the \033[31memail address\033[0m that you want to autoconfigure for mutt/mbsync\\n\tEmail: \033[36m"
  124. read -r fulladdr
  125. keyid=$("$GPG" --list-keys --with-colons "$fulladdr" | awk -F: '/^pub:/ { print $5 }')
  126. printf "\033[0m"
  127. while ! echo "$fulladdr" | grep "$emailre" >/dev/null; do
  128. printf "That is not a valid \033[31memail address\033[0m, please retype the desired email.\\n\\nEmail: \033[36m\t"
  129. read -r fulladdr
  130. printf "\033[0m"
  131. done
  132. domain="$(echo "$fulladdr" | sed "s/.*@//")"
  133. search_query=$domain
  134. case "$domain" in
  135. protonmail.com|protonmail.ch|pm.me)
  136. search_query='protonmail.com' ;;
  137. *)
  138. while : ; do
  139. printf "\nIs your email hosted with Protonmail? [yes/no] "
  140. read -r is_protonmail
  141. case $is_protonmail in
  142. [Yy][Ee][Ss]) search_query='protonmail.com' && break;;
  143. [Nn][Oo]) break;;
  144. *) printf 'Please answer Yes or No'
  145. esac; done;
  146. esac
  147. printf "\\nSearching for \033[32m%s\033[0m in \033[34m\`domains.csv\`\033[0m..." "$domain"
  148. serverinfo="$(grep "^$search_query" "$muttshare/domains.csv" 2>/dev/null)"
  149. if [ -z "$serverinfo" ]; then
  150. printf "Your email domain is not in mutt-wizard's database yet.\\nmutt-wizard will still autoconfigure everything, but you will have to manually type in your service's IMAP and SMTP server information.\\nYou can usually quickly find this by internet searching for it.\\n"
  151. printf "Insert the IMAP server for your email provider (excluding the port number)\\n\033[36m\t"
  152. read -r imap
  153. printf "\033[0mWhat is your server's IMAP port number? (Usually something like 993)\\n\033[36m\t"
  154. read -r iport
  155. printf "\033[0mInsert the SMTP server for your email provider (excluding the port number)\\n\033[36m\t"
  156. read -r smtp
  157. printf "\033[0mWhat is your server's SMTP port number? (Usually 587 or 465)\\n\033[36m\t"
  158. read -r sport
  159. printf "\033[0m\\nGreat! If you want to be helpful, copy the line below and you can add it to the \`domains.csv\` file on Github.\\nThis will make things easier for others who use your email provider.\\n\\n%s,%s,%s,%s,%s\\n\\nAlthough be sure to test to see if these settings work first! ;-)\\n" "$domain" "$imap" "$iport" "$smtp" "$sport"
  160. else
  161. IFS=, read -r service imap iport smtp sport <<EOF
  162. $serverinfo
  163. EOF
  164. printf "\\n\033[3;33mCongrats!\033[0m Server info has automatically been found, so you won't have to look anything up!\\n\t\033[1mIMAP server\033[0m: %s\\n\t\033[1mIMAP port\033[0m: %s\\n\t\033[1mSMTP server\033[0m: %s\\n\t\033[1mSMTP port\033[0m: %s\\nThis data will be used by the wizard.\\n" "$imap" "$iport" "$smtp" "$sport"
  165. case "$service" in
  166. gmail.com) printf "\033[31mREMEMBER: Gmail users must enable \"less secure\" (third-party) applications first for the sync to work:\\nhttps://support.google.com/accounts/answer/6010255\\n\033[0m" ;;
  167. protonmail.ch|protonmail.com|pm.me) printf "\033[31mREMEMBER: Protonmail users must install and configure Protonmail Bridge first for the sync to work:\\nhttps://protonmail.com/bridge/\\n\033[0m" && ssltype="None" ;;
  168. esac
  169. [ "$sport" = 465 ] && starttlsoff="tls_starttls off"
  170. fi
  171. printf "Enter the \033[35mfull name\033[0m you want to be identified by on this account.\\n\tReal name: "
  172. read -r realname
  173. printf "Enter a short, \033[36mone-word identifier\033[0m for this email account that will distinguish them from any other accounts you add.\\n\tAccount name: "
  174. read -r title
  175. while ! echo "$title" | grep "$namere" >/dev/null || ls "$accdir"/[0-9]"-$title.muttrc" >/dev/null 2>&1; do
  176. printf "\033[31mTry again\033[0m. Pick a nickname that is one word only including lowercase letters and _ or - and that you have \033[1mnot\033[0m used before.\\n\tAccount name: \033[36m\t"
  177. read -r title
  178. printf "\033[0m"
  179. done
  180. printf "If your account has a special username different from your address, insert it now. Otherwise leave this prompt totally blank.\\n\033[34mMost accounts will not have a separate login, so you should probably leave this blank.\033[0m\\n\tLogin(?): \033[36m"
  181. read -r login
  182. printf "\033[0m"
  183. [ -z "$login" ] && login="$fulladdr"
  184. [ "$accounttype" = "offline" ] && printf "If you want to limit the number of messages kept offline to a number, enter that number below. If you do not want to limit your mail and would like \`mbsync\` to sync all mail, press enter without typing a number.\\n\t" && read -r maxmes
  185. echo "$maxmes" | grep "[1-9]" >/dev/null || maxmes="0"
  186. getpass
  187. getprofiles
  188. mkdir -p "$muttdir" "$accdir" "$cachedir/$title/bodies" "$HOME/.config/msmtp"
  189. getaccounts
  190. for x in $(seq 1 9); do echo "$accounts" | grep "$x" >/dev/null 2>&1 || { export idnum="$x"; break ;}; done
  191. [ ! -f "$msmtprc" ] && echo "$msmtp_header" > "$msmtprc"
  192. echo "$msmtp_profile" >> "$msmtprc"
  193. command -V apt-get >/dev/null 2>&1 && ln -s "$msmtprc" "$HOME/.msmtprc" 2>/dev/null
  194. case "$service" in
  195. protonmail.ch|protonmail.com|pm.me) protonfinger || return 1 ;;
  196. esac
  197. echo "$mutt_profile" > "$accdir/$idnum-$title.muttrc"
  198. echo "$mbsync_profile" >> "$mbsyncrc"
  199. notmuchauto
  200. [ ! -f "$muttrc" ] && echo "# vim: filetype=neomuttrc" > "$muttrc" && echo "muttrc created."
  201. ! grep "^source.*mutt-wizard.muttrc" "$muttrc" >/dev/null && echo "source $mwconfig # mw-autogenerated" >> "$muttrc"
  202. ! grep "^source.*.muttrc" "$muttrc" | grep -v "$mwconfig" >/dev/null && echo "source $accdir/$idnum-$title.muttrc # mw-autogenerated" >> "$muttrc"
  203. echo "macro index,pager i$idnum '<sync-mailbox><enter-command>source $accdir/$idnum-$title.muttrc<enter><change-folder>!<enter>;<check-stats>' \"switch to $fulladdr\" # mw-autogenerated" >> "$muttrc"
  204. }
  205. protonfinger() { printf "Getting Protonmail bridge fingerprint...\\n"
  206. fingerprint="$(msmtp --serverinfo --host=127.0.0.1 --port=1025 --tls --tls-certcheck=off | grep SHA256: | sed 's/^.*: //')"
  207. sed -ibu "s/account $title/&\ntls_trust_file\ntls_fingerprint $fingerprint/" "$msmtprc" ; rm -f "$msmtprc"bu
  208. }
  209. getpass() { while : ; do pass rm -f "mutt-wizard-$title" >/dev/null 2>&1
  210. pass insert "mutt-wizard-$title" && break; done ;}
  211. formatShortcut() { \
  212. while read -r data; do { echo "macro index,pager g$1 \"<change-folder>$data<enter>\" \"go to $2\" # mw-autogenerated"
  213. echo "macro index,pager M$1 \";<save-message>$data<enter>\" \"move mail to $2\" # mw-autogenerated"
  214. echo "macro index,pager C$1 \";<copy-message>$data<enter>\" \"copy mail to $2\" # mw-autogenerated"; } >> "$accdir/$idnum-$title.muttrc"
  215. done ;}
  216. tryconnect() { mkdir -p "$maildir/$title"
  217. if mailboxes="$(mbsync -l "$title" | sed 's/\//./')" >/dev/null 2>&1 && [ -n "$mailboxes" ]; then
  218. [ "$accounttype" = "online" ] && sed -ibu "/IMAPStore $title-remote$/,/# End profile/d" "$mbsyncrc" ; rm -f "$mbsyncrc"bu
  219. printf "\033[32mMailboxes detected.\033[0m\\n"
  220. echo "$mailboxes" | xargs -I {} mkdir -p "$maildir/$title/{}"
  221. return 0
  222. else
  223. printf "\033[31m\033[31mLog-on not successful.\033[0m\\nIt seems that either you inputted the wrong password or server settings, or there are other requirements for your account out of the control of mutt-wizard.\\n"
  224. return 1
  225. fi ;}
  226. finalize() { \
  227. boxes="$(find "$maildir/$title/" -mindepth 1 -type d | sed "s/\ /\\\ /g;s/^.*\//=/;/=\(cur\|new\|tmp\)$/d")"
  228. [ -z "$boxes" ] && printf "\033[31mNo local mailboxes have been detected for %s.\033[0m\\nThis means that mbsync has not been successfully run.\\nRun mbsync, and if it has an error, be sure to check your password and server settings manually if needbe.\\n" "$title" && return
  229. printf "Setting default mailboxes for your Inbox, Sent, Drafts and Trash in mutt...\\n"
  230. spoolfile=$(echo "$boxes" | grep -i -m 1 inbox | sed 's/=/+/g')
  231. record=$(echo "$boxes" | grep -i -m 1 sent | sed 's/=/+/g')
  232. postponed=$(echo "$boxes" | grep -i -m 1 draft | sed 's/=/+/g')
  233. trash=$(echo "$boxes" | grep -i -m 1 trash | sed 's/=/+/g')
  234. sed -ibu "/^mailboxes\|^set record\|^set postponed\|^set trash\|^set spoolfile/d" "$accdir/$idnum-$title.muttrc" ; rm -f "$accdir/$idnum-$title.muttrcbu"
  235. { echo "set spoolfile = \"$spoolfile\""; echo "set record = \"$record\""; echo "set postponed = \"$postponed\""; echo "set trash = \"$trash\""; } >> "$accdir/$idnum-$title.muttrc"
  236. echo "mailboxes $(echo "$boxes" | sed -e "s/^\|$/\"/g" | tr "\n" " ")" >> "$accdir/$idnum-$title.muttrc"
  237. printf "Setting up your keyboard shortcuts for jumping between mailboxes...\\n"
  238. sed -ibu "/# mw-autogenerated/d" "$accdir/$idnum-$title.muttrc" ; rm -f "$accdir/$idnum-$title.muttrcbu"
  239. echo "$boxes" | grep -i inbox | head -n 1 | formatShortcut i inbox
  240. echo "$boxes" | grep -i sent | head -n 1 | formatShortcut s sent
  241. echo "$boxes" | grep -i draft | head -n 1 | formatShortcut d drafts
  242. echo "$boxes" | grep -i trash | head -n 1 | formatShortcut t trash
  243. echo "$boxes" | grep -i spam | head -n 1 | formatShortcut S spam
  244. echo "$boxes" | grep -i junk | head -n 1 | formatShortcut j junk
  245. echo "$boxes" | grep -i archive | head -n 1 | formatShortcut a archive
  246. [ "$accounttype" = "offline" ] && printf "All done.\\n\033[33mYou should now be able to run \`\033[32mmbsync %s\033[33m\` to begin to download your mail.\033[0m\\n" "$title"
  247. command -V urlview >/dev/null 2>&1 && [ ! -f "$HOME/.urlview" ] && echo "COMMAND \$BROWSER" > "$HOME/.urlview"
  248. return 0
  249. }
  250. confirm() { printf "Do you want to %s? [yes/N]\\n\t" "$@" && read -r input && ! echo "$input" | grep -i "^yes$" >/dev/null && printf "That doesn't seem like a yes to me.\\n\\n" && return 1
  251. printf "Are you really, really sure you want to %s?\\n\t" "$@" && read -r input && ! echo "$input" | grep -i "^yes$" >/dev/null && printf "That doesn't seem like a yes to me.\\n\\n" && return 1
  252. return 0 ;}
  253. pick() { printf "Select an accounts to %s:\\n" "$1"
  254. list
  255. read -r input
  256. [ -z "$input" ] && return 1
  257. title="$(echo "$accounts" | grep "$input" | awk '{print $2}')"
  258. [ -z "$title" ] && printf "Invalid response." && return 1
  259. return 0 ;}
  260. delete() { sed -ibu "/IMAPStore $title-remote$/,/# End profile/d" "$mbsyncrc" ; rm -rf "$mbsyncrc"bu
  261. rm -rf "${cachedir:?}/${title:?}" "$accdir/"[1-9]"-$title.muttrc"
  262. sed -ibu "/[0-9]-$title.muttrc/d" "$muttrc" ; rm -f "$muttrc"bu
  263. sed -ibu "/account $title/,/^\(\s*$\|account\)/d" "$msmtprc"; rm -f "$msmtprc"bu
  264. }
  265. asktype() { while : ; do
  266. printf "Do you want to keep your mail for this account offline with mbsync? [yes/no]\\n\t"
  267. read -r offnot
  268. case "$offnot" in
  269. [Yy][Ee][Ss]) accounttype="offline" && break ;;
  270. [Nn][Oo]) accounttype="online" && break ;;
  271. *) echo "Write out either yes or no completely. Try again or press ctrl-c to quit." ;;
  272. esac; done ;}
  273. purge() { confirm "delete all account data" || exit
  274. rm -rf "$mbsyncrc" "$accdir" "$HOME/.config/msmtp" "$cachedir"
  275. echo "All configs and account settings have been purged."
  276. sed -ibu "/\# mw-autogenerated/d" "$muttrc" ; rm -f "$muttrc"bu
  277. }
  278. syncwrapper() { mbsync -a &
  279. ( kill -46 "$(pidof "${STATUSBAR:-dwmblocks}")" >/dev/null 2>&1 ) 2>/dev/null
  280. wait
  281. ( kill -46 "$(pidof "${STATUSBAR:-dwmblocks}")" >/dev/null 2>&1 ) 2>/dev/null
  282. notmuch new
  283. }
  284. notmuchauto() { \
  285. [ -z "$NOTMUCH_CONFIG" ] && NOTMUCH_CONFIG="$HOME/.notmuch-config"
  286. [ -f "$NOTMUCH_CONFIG" ] && return 0
  287. nmbasic="[database]
  288. path=$maildir
  289. [user]
  290. name=$realname
  291. primary_email=$fulladdr
  292. [new]
  293. tags=unread;inbox;
  294. ignore=.mbsyncstate;.uidvalidity
  295. [search]
  296. exclude_tags=deleted;spam;
  297. [maildir]
  298. synchronize_flags=true
  299. [crypto]
  300. gpg_path=$GPG"
  301. echo "$nmbasic" > "$NOTMUCH_CONFIG" ;}
  302. trap 'echo -e "\033[0m\n"; exit' INT ABRT
  303. case "$1" in
  304. ls) list ;;
  305. add) asktype && askinfo && tryconnect && finalize || delete ;;
  306. pass) pick "change the password of" && getpass ;;
  307. delete) pick delete && confirm "delete the \`$title\` profile" && delete ;;
  308. sync) syncwrapper ;;
  309. purge) purge ;;
  310. *) cat << EOF
  311. mw: mutt-wizard, auto-configure email accounts for mutt
  312. including downloadable mail with \`isync\`.
  313. Allowed options:
  314. add Add and autoconfigure an email address (9 max.)
  315. ls List configured accounts
  316. delete Pick an account to delete
  317. purge Delete all accounts and settings
  318. sync Syncs mail and updates notmuch database
  319. all else Print this message
  320. NOTE: Once at least one account is added, you can run
  321. \`mbsync -a\` to begin downloading mail.
  322. EOF
  323. esac