Luke Smith
1 rok temu
6 zmienionych plików z 84 dodań i 95 usunięć
-
+25 -33README.md
-
+22 -16bin/mailsync
-
+26 -34bin/mw
-
+3 -7mw.1
-
+4 -3share/domains.csv
-
+4 -2share/mutt-wizard.muttrc
+ 25
- 33
README.md
Wyświetl plik
| @@ -1,5 +1,7 @@ | |||
| # mutt-wizard | |||
| https://muttwizard.com/ | |||
| Get this great stuff without effort: | |||
| - A full-featured and autoconfigured email client on the terminal with neomutt | |||
| @@ -57,7 +59,7 @@ A user of Arch-based distros can also install the current mutt-wizard release fr | |||
| - `notmuch` - index and search mail. Install it and run `notmuch setup`, tell | |||
| it that your mail is in `~/.local/share/mail/` (although `mw` will do this | |||
| automatically if you haven't set notmuch up before). You can run it in mutt | |||
| with `ctrl-f`. Run `notmuch new` to process new mail. | |||
| with <kbd>ctrl-f</kbd>. Run `notmuch new` to process new mail. | |||
| - `abook` - a terminal-based address book. Pressing tab while typing an address | |||
| to send mail to will suggest contacts that are in your abook. | |||
| - `urlview` - outputs urls in mail to browser. | |||
| @@ -99,34 +101,34 @@ The mutt-wizard runs via the command `mw`. Once setup is complete, you'll use | |||
| #### General Settings | |||
| - `-p` -- Add a Protonmail account. | |||
| - `-f` -- Assume mailbox names and force account configuration without | |||
| connecting online at all. | |||
| - `-o` -- Configure mutt for an account, but do not keep mail offline. | |||
| - `-P` -- Use POP protocol instead of IMAP (requires `mpop` installed). | |||
| - `-p` -- Use POP protocol instead of IMAP (requires `mpop` installed). | |||
| ## Neomutt user interface | |||
| To give you an example of the interface, here's an idea: | |||
| - `m` - send mail (uses your default `$EDITOR` to write) | |||
| - `j`/`k` and `d`/`u` - vim-like bindings to go down and up (or `d`/`u` to go | |||
| - <kbd>m</kbd> - send mail (uses your default `$EDITOR` to write) | |||
| - <kbd>j</kbd>/<kbd>k</kbd> and <kbd>d</kbd>/<kbd>u</kbd> - vim-like bindings to go down and up (or <kbd>d</kbd>/<kbd>u</kbd> to go | |||
| down/up a page). | |||
| - `l` - open mail, or attachment page or attachment | |||
| - `h` - the opposite of `l` | |||
| - `r`/`R` - reply/reply all to highlighted mail | |||
| - `s` - save selected mail or selected attachment | |||
| - `gs`,`gi`,`ga`,`gd`,`gS` - Press `g` followed by another letter to change | |||
| mailbox: `s`ent, `i`nbox, `a`rchive, `d`rafts, `S`pam, etc. | |||
| - `M` and `C` - For `M`ove and `C`opy: follow them with one of the mailbox | |||
| letters above, i.e. `MS` means "move to Spam". | |||
| - `i#` - Press `i` followed by a number 1-9 to go to a different account. If you | |||
| - <kbd>l</kbd> - open mail, or attachment page or attachment | |||
| - <kbd>h</kbd> - the opposite of <kbd>l</kbd> | |||
| - <kbd>r</kbd>/<kbd>R</kbd> - reply/reply all to highlighted mail | |||
| - <kbd>s</kbd> - save selected mail or selected attachment | |||
| - <kbd>gs</kbd>,<kbd>gi</kbd>,<kbd>ga</kbd>,<kbd>gd</kbd>,<kbd>gS</kbd> - Press <kbd>g</kbd> followed by another letter to change | |||
| mailbox: <kbd>s</kbd>ent, <kbd>i</kbd>nbox, <kbd>a</kbd>rchive, <kbd>d</kbd>rafts, <kbd>S</kbd>pam, etc. | |||
| - <kbd>M</kbd> and <kbd>C</kbd> - For <kbd>M</kbd>ove and <kbd>C</kbd>opy: follow them with one of the mailbox | |||
| letters above, i.e. <kbd>MS</kbd> means "move to Spam". | |||
| - <kbd>i#</kbd> - Press <kbd>i</kbd> followed by a number 1-9 to go to a different account. If you | |||
| add 9 accounts via mutt-wizard, they will each be assigned a number. | |||
| - `a` to add address/person to abook and `Tab` while typing address to complete | |||
| - <kbd>a</kbd> to add address/person to abook and <kbd>Tab</kbd> while typing address to complete | |||
| one from abook. | |||
| - `?` - see all keyboard shortcuts | |||
| - `ctrl-j`/`ctrl-k` - move up and down in sidebar, `ctrl-o` opens mailbox. | |||
| - `ctrl-b` - open a menu to select a URL you want to open in your browser. | |||
| - <kbd>?</kbd> - see all keyboard shortcuts | |||
| - <kbd>ctrl-j</kbd>/<kbd>ctrl-k</kbd> - move up and down in sidebar, <kbd>ctrl-o</kbd> opens mailbox. | |||
| - <kbd>ctrl-b</kbd> - open a menu to select a URL you want to open in your browser. | |||
| - <kbd>p</kbd> - encrypt/sign your message (in compose view, before sending the email). | |||
| ## Additional functionality | |||
| @@ -137,7 +139,7 @@ To give you an example of the interface, here's an idea: | |||
| - `notmuch` - Index and search mail. Install it and run `notmuch setup`, tell it | |||
| that your mail is in `~/.local/share/mail/` (although `mw` will do this | |||
| automatically if you haven't set notmuch up before). You can run it in mutt | |||
| with `ctrl-f`. Run `notmuch new` to process new mail. | |||
| with <kbd>ctrl-f</kbd>. Run `notmuch new` to process new mail. | |||
| - `abook` - A terminal-based address book. Pressing tab while typing an address | |||
| to send mail to will suggest contacts that are in your abook. | |||
| - `urlview` - Outputs URLs in an email to your browser. | |||
| @@ -167,7 +169,7 @@ To give you an example of the interface, here's an idea: | |||
| errors generally. | |||
| - Addition of a manual `man mw` | |||
| - Now handles POP protocol via `mpop` for those who prefer it (add an account | |||
| with the `-P` option). POP configs are still generated automatically. | |||
| with the `-p` option). POP configs are still generated automatically. | |||
| ## Help the Project! | |||
| @@ -176,10 +178,9 @@ To give you an example of the interface, here's an idea: | |||
| errors. | |||
| - Open a PR to add new server information into `domains.csv` so their users can | |||
| more easily use mutt-wizard. | |||
| - If nothing else, [Donate!](https://paypal.me/LukeMSmith) | |||
| See Luke's website [here](https://lukesmith.xyz). Email him at | |||
| [luke@lukesmith.xyz](mailto:luke@lukesmith.xyz). | |||
| - If nothing else, donate: | |||
| - XMR: `8AzeWXhJvYJ1VeENHcNXCR1dLMgDALreZ1BdooZVjRKndv6myr3t1ue6C4ML2an5fWSpcP1sTDA9nKUMevkukDXG6chRjNv` | |||
| - BTC: `bc1qacqfp36ffv9mafechmvk8f6r8qy4tual6rcm9p` | |||
| ## Details for Tinkerers | |||
| @@ -204,15 +205,6 @@ See Luke's website [here](https://lukesmith.xyz). Email him at | |||
| applications requires turning off two-factor authentication and this will | |||
| circumvent that. You might also need to manually "Enable IMAP" in the | |||
| settings. | |||
| - Protonmail accounts require a "Protonmail Bridge" to access | |||
| PM's IMAP and SMTP servers. Configure that before running mutt-wizard. Note | |||
| that when mutt-wizard asks for a password, you should put in your | |||
| [bridge password](https://protonmail.com/bridge/thunderbird#3), not your | |||
| account password. | |||
| - Protonmail bridge is prone to timing out. Watch out for this while adding an | |||
| account. If the bridge times out, try again. It might help to | |||
| [increase the timeout](https://protonmail.com/support/knowledge-base/thunderbird-connection-server-timed-error/) | |||
| in your `mbsyncrc`. | |||
| - If you have a university email or enterprise-hosted email for work, there | |||
| might be other hurdles or two-factor authentication you have to jump through. | |||
| Some, for example, will want you to create a separate IMAP password, etc. | |||
+ 22
- 16
bin/mailsync
Wyświetl plik
| @@ -11,8 +11,6 @@ | |||
| # issues. It also should at least be compatible with Linux (and maybe BSD) with | |||
| # Xorg and MacOS as well. | |||
| # Run only if user logged in (prevent cron errors) | |||
| pgrep -u "${USER:=$LOGNAME}" >/dev/null || { echo "$USER not logged in; sync will not run."; exit ;} | |||
| # Run only if not already running in other instance | |||
| pgrep mbsync >/dev/null && { echo "mbsync is already running."; exit ;} | |||
| @@ -21,7 +19,7 @@ pgrep mbsync >/dev/null && { echo "mbsync is already running."; exit ;} | |||
| # files for variable assignments. This is ugly, but there are few options that | |||
| # will work on the maximum number of machines. | |||
| eval "$(grep -h -- \ | |||
| "^\s*\(export \)\?\(MBSYNCRC\|PASSWORD_STORE_DIR\|NOTMUCH_CONFIG\|GNUPGHOME\)=" \ | |||
| "^\s*\(export \)\?\(MBSYNCRC\|MPOPRC\|PASSWORD_STORE_DIR\|NOTMUCH_CONFIG\|GNUPGHOME\)=" \ | |||
| "$HOME/.profile" "$HOME/.bash_profile" "$HOME/.zprofile" "$HOME/.config/zsh/.zprofile" "$HOME/.zshenv" \ | |||
| "$HOME/.config/zsh/.zshenv" "$HOME/.bashrc" "$HOME/.zshrc" "$HOME/.config/zsh/.zshrc" \ | |||
| "$HOME/.pam_environment" 2>/dev/null)" | |||
| @@ -29,6 +27,7 @@ eval "$(grep -h -- \ | |||
| export GPG_TTY="$(tty)" | |||
| [ -n "$MBSYNCRC" ] && alias mbsync="mbsync -c $MBSYNCRC" || MBSYNCRC="$HOME/.mbsyncrc" | |||
| [ -n "$MPOPRC" ] || MPOPRC="$HOME/.config/mpop/config" | |||
| lastrun="${XDG_CONFIG_HOME:-$HOME/.config}/mutt/.mailsynclastrun" | |||
| @@ -42,7 +41,7 @@ case "$(uname)" in | |||
| *systemd*|*openrc*) export DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/$(id -u)/bus ;; | |||
| esac | |||
| # remember if a display server is running since `ps` doesn't always contain a display | |||
| pgrepoutput="$(pgrep -a X\(org\|wayland\))" | |||
| pgrepoutput="$(pgrep -ax X\(\|org\|wayland\))" | |||
| displays="$(echo "$pgrepoutput" | grep -wo "[0-9]*:[0-9]\+" | sort -u)" | |||
| notify() { [ -n "$pgrepoutput" ] && for x in ${displays:-0:}; do | |||
| export DISPLAY=$x | |||
| @@ -54,14 +53,16 @@ esac | |||
| # Check account for new mail. Notify if there is new content. | |||
| syncandnotify() { | |||
| acc="$(echo "$account" | sed "s/.*\///")" | |||
| if [ -z "$opts" ]; then mbsync "$acc"; else mbsync "$opts" "$acc"; fi | |||
| if [ "$1" = "pop" ]; then | |||
| # Handle POP | |||
| mpop "$acc" | |||
| else | |||
| # Handle IMAP | |||
| if [ -z "$opts" ]; then mbsync "$acc"; else mbsync "$opts" "$acc"; fi | |||
| fi | |||
| new=$(find\ | |||
| "$HOME/.local/share/mail/$acc/INBOX/new/"\ | |||
| "$HOME/.local/share/mail/$acc/Inbox/new/"\ | |||
| "$HOME/.local/share/mail/$acc/inbox/new/"\ | |||
| "$HOME/.local/share/mail/$acc/INBOX/cur/"\ | |||
| "$HOME/.local/share/mail/$acc/Inbox/cur/"\ | |||
| "$HOME/.local/share/mail/$acc/inbox/cur/"\ | |||
| "$HOME/.local/share/mail/$acc/"[Ii][Nn][Bb][Oo][Xx]/new/\ | |||
| "$HOME/.local/share/mail/$acc/"[Ii][Nn][Bb][Oo][Xx]/cur/\ | |||
| -type f -newer "$lastrun" 2> /dev/null) | |||
| newcount=$(echo "$new" | sed '/^\s*$/d' | wc -l) | |||
| case 1 in | |||
| @@ -70,23 +71,28 @@ syncandnotify() { | |||
| } | |||
| # Sync accounts passed as argument or all. | |||
| if [ "$#" -eq "0" ]; then | |||
| accounts="$(awk '/^Channel/ {print $2}' "$MBSYNCRC")" | |||
| else | |||
| if [ "$#" -gt "0" ]; then | |||
| for arg in "$@"; do | |||
| [ "${arg%${arg#?}}" = '-' ] && opts="${opts:+${opts} }${arg}" && shift 1 | |||
| done | |||
| accounts=$* | |||
| fi | |||
| # TODO handle account passed from argument | |||
| [ -z "$accounts" ] && accounts="$(awk '/^Channel/ {print $2}' "$MBSYNCRC")" | |||
| [ -z "$pop_accounts" ] && pop_accounts="$(awk '/^account/ {print $2}' "$MPOPRC")" | |||
| # Parallelize multiple accounts | |||
| for account in $accounts; do | |||
| syncandnotify & | |||
| syncandnotify "imap" & | |||
| done | |||
| for account in $pop_accounts; do | |||
| syncandnotify "pop" & | |||
| done | |||
| wait | |||
| notmuch new 2>/dev/null | |||
| notmuch new --quiet | |||
| #Create a touch file that indicates the time of the last run of mailsync | |||
| touch "$lastrun" | |||
+ 26
- 34
bin/mw
Wyświetl plik
| @@ -7,14 +7,13 @@ cachedir="${XDG_CACHE_HOME:-$HOME/.cache}/mutt-wizard" | |||
| muttrc="${XDG_CONFIG_HOME:-$HOME/.config}/mutt/muttrc" | |||
| accdir="${XDG_CONFIG_HOME:-$HOME/.config}/mutt/accounts" | |||
| msmtprc="${XDG_CONFIG_HOME:-$HOME/.config}/msmtp/config" | |||
| msmtplog="${XDG_CONFIG_HOME:-$HOME/.config}/msmtp/msmtp.log" | |||
| msmtplog="${XDG_CACHE_HOME:-$HOME/.cache}/msmtp/msmtp.log" | |||
| mbsyncrc="${MBSYNCRC:-$HOME/.mbsyncrc}" | |||
| mpoprc="${XDG_CONFIG_HOME:-$HOME/.config}/mpop/config" | |||
| alias mbsync='mbsync -c "$mbsyncrc"' | |||
| # On Ubuntu/Debian, a link is needed since they use an older version. | |||
| if command -V apt-get >/dev/null 2>&1; then | |||
| ln -s "$msmtprc" "$HOME/.msmtprc" 2>/dev/null | |||
| master="Master" | |||
| slave="Slave" | |||
| fi | |||
| @@ -38,12 +37,14 @@ getaccounts() { accounts="$(find -L "$accdir" -type f 2>/dev/null | grep -o "\S* | |||
| list() { getaccounts && [ -n "$accounts" ] && echo "$accounts" || exit 1 ;} | |||
| prepmsmtp() { echo "account $fulladdr | |||
| prepmsmtp() { mkdir -p "${msmtprc%/*}" "${msmtplog%/*}" | |||
| ln -s "$msmtprc" "$HOME/.msmtprc" 2>/dev/null | |||
| echo "account $fulladdr | |||
| host $smtp | |||
| port ${sport:-465} | |||
| from $fulladdr | |||
| user $login | |||
| passwordeval \"pass $fulladdr\" | |||
| passwordeval \"pass $passprefix$fulladdr\" | |||
| auth ${auth:-on} | |||
| tls on | |||
| tls_trust_file $sslcert | |||
| @@ -58,7 +59,7 @@ IMAPStore $fulladdr-remote | |||
| Host $imap | |||
| Port ${iport:-993} | |||
| User $login | |||
| PassCmd \"pass $fulladdr\" | |||
| PassCmd \"pass $passprefix$fulladdr\" | |||
| AuthMechs LOGIN | |||
| SSLType ${imapssl:-IMAPS} | |||
| CertificateFile $sslcert | |||
| @@ -87,10 +88,11 @@ tls on | |||
| user $login | |||
| host $imap | |||
| delivery maildir ${XDG_DATA_HOME:-$HOME/.local/share}/mail/$fulladdr/${inbox:-INBOX} | |||
| passwordeval pass $fulladdr | |||
| passwordeval pass $passprefix$fulladdr | |||
| " >> "$mpoprc" ;} | |||
| prepmutt() { echo "# vim: filetype=neomuttrc | |||
| prepmutt() { mkdir -p "${muttrc%/*}" "$accdir" | |||
| echo "# vim: filetype=neomuttrc | |||
| # muttrc file for account $fulladdr | |||
| set realname = \"$realname\" | |||
| set from = \"$fulladdr\" | |||
| @@ -119,8 +121,6 @@ macro index \eh \"<pipe-message>$prefix/libexec/gpg-wks-client --receive | msmtp | |||
| } | |||
| getprofiles() { \ | |||
| mkdir -p "${muttrc%/*}" "$accdir" "${XDG_CONFIG_HOME:-$HOME/.config}/msmtp" | |||
| unset msmtp_header msmtp_profile mutt_profile mbsync_profile | |||
| case "$iport" in | |||
| 1143) imapssl=None ;; | |||
| 143) imapssl=STARTTLS ;; | |||
| @@ -128,7 +128,7 @@ getprofiles() { \ | |||
| case "$type" in | |||
| online) folder="imaps://$login@$imap:${iport:-993}" | |||
| extra="set imap_user = \"$login\" | |||
| set imap_pass = \"\`pass $fulladdr\`\" | |||
| set imap_pass = \"\`pass $passprefix$fulladdr\`\" | |||
| set ssl_starttls = yes | |||
| set ssl_force_tls = yes" | |||
| ;; | |||
| @@ -176,7 +176,7 @@ delete() { if [ -z "${fulladdr+x}" ]; then | |||
| sed -ibu "/\([0-9]-\)\?$fulladdr.muttrc/d" "$muttrc" 2>/dev/null; rm -f "$muttrc"bu | |||
| sed -ibu "/account $fulladdr$/,/^\(\s*$\|account\)/d" "$msmtprc" 2>/dev/null; rm -f "$msmtprc"bu | |||
| sed -ibu "/account $fulladdr$/,/^\(\s*$\|account\)/d" "$mpoprc" 2>/dev/null; rm -f "$mpoprc"bu | |||
| pass rm -f "$fulladdr" >/dev/null 2>&1 | |||
| pass rm -f "$passprefix$fulladdr" >/dev/null 2>&1 | |||
| [ -n "${purge+x}" ] && rm -rf "${maildir:?}/${fulladdr:?}" | |||
| for file in "$msmtprc" "$mbsyncrc" "$mpoprc"; do | |||
| @@ -200,6 +200,7 @@ askinfo() { \ | |||
| read -r smtp | |||
| [ "$sport" = 587 ] && tlsline="# tls_starttls" | |||
| [ -z "$realname" ] && realname="${fulladdr%%@*}" | |||
| [ -z "$passprefix" ] && passprefix="" | |||
| hostname="${fulladdr#*@}" | |||
| login="${login:-$fulladdr}" | |||
| if [ -n "${password+x}" ]; then | |||
| @@ -209,22 +210,22 @@ askinfo() { \ | |||
| fi | |||
| } | |||
| createpass() { echo "$password" > "$PASSWORD_STORE_DIR/$fulladdr" | |||
| "$GPG" -qe $(printf -- " -r %s" $(cat "$PASSWORD_STORE_DIR/.gpg-id")) "$PASSWORD_STORE_DIR/$fulladdr" | |||
| rm -f "$PASSWORD_STORE_DIR/$fulladdr" ;} | |||
| createpass() { echo "$password" > "$PASSWORD_STORE_DIR/$passprefix$fulladdr" | |||
| "$GPG" -qe $(printf -- " -r %s" $(cat "$PASSWORD_STORE_DIR/.gpg-id")) "$PASSWORD_STORE_DIR/$passprefix$fulladdr" | |||
| rm -f "$PASSWORD_STORE_DIR/$passprefix$fulladdr" ;} | |||
| getpass() { while : ; do pass rm -f "$fulladdr" >/dev/null 2>&1 | |||
| pass insert -f "$fulladdr" && break; done ;} | |||
| getpass() { while : ; do pass rm -f "$passprefix$fulladdr" >/dev/null 2>&1 | |||
| pass insert -f "$passprefix$fulladdr" && break; done ;} | |||
| getboxes() { if [ -n "${force+x}" ] ; then | |||
| mailboxes="$(printf "INBOX\\nDrafts\\nJunk\\nTrash\\nSent\\nArchive")" | |||
| else | |||
| info="$(curl --location-trusted -s -m 5 --user "$login:$(pass "$fulladdr")" --url "${protocol:-imaps}://$imap:${iport:-993}")" | |||
| info="$(curl --location-trusted -s -m 5 --user "$login:$(pass "$passprefix$fulladdr")" --url "${protocol:-imaps}://$imap:${iport:-993}")" | |||
| [ -z "$info" ] && echo "Log-on not successful." && return 1 | |||
| mailboxes="$(echo "$info" | grep -v HasChildren | sed "s/.*\" //;s/\"//g" | tr -d '\r')" | |||
| fi | |||
| [ "$type" = "pop" ] && mailboxes="INBOX" | |||
| for x in $(sed -n "/^macro.* i[0-9] / s/\(^macro.* i\| .*\)//gp " "$muttrc" | sort -u; echo 0); do | |||
| for x in $(sed -n "/^macro.* i[0-9] / s/\(^macro.* i\| .*\)//gp " "$muttrc" 2>/dev/null | sort -u; echo 0); do | |||
| idnum=$((idnum + 1)) | |||
| [ "$idnum" -eq "$x" ] || break | |||
| done | |||
| @@ -262,7 +263,7 @@ togglecron() { cron="$(mktemp)" | |||
| sed -ibu /mailsync/d "$cron"; rm -f "$cron"bu | |||
| else | |||
| echo "Adding automatic mailsync every ${cronmin:-10} minutes..." | |||
| echo "*/${cronmin-10} * * * * $prefix/bin/mailsync" >> "$cron" | |||
| echo "*/${cronmin:-10} * * * * $prefix/bin/mailsync -q" >> "$cron" | |||
| fi && | |||
| crontab "$cron"; rm -f "$cron" ;} | |||
| @@ -297,8 +298,8 @@ Options allowed with -a: | |||
| -s SMTP server address | |||
| -S SMTP server port | |||
| -x Password for account (recommended to be in double quotes) | |||
| -p Install for a Protonmail account. | |||
| -P Add for a POP server instead of IMAP. | |||
| -P Pass Prefix (prefix of the file where password is stored) | |||
| -p Add for a POP server instead of IMAP. | |||
| -X Delete an account's local email too when deleting. | |||
| -o Configure address, but keep mail online. | |||
| -f Assume typical English mailboxes without attempting log-on. | |||
| @@ -306,7 +307,7 @@ Options allowed with -a: | |||
| NOTE: Once at least one account is added, you can run | |||
| \`mbsync -a\` to begin downloading mail. | |||
| To change an account's password, run \`pass edit your@email.com\`. | |||
| To change an account's password, run \`pass edit '$passprefix'your@email.com\`. | |||
| EOF | |||
| } | |||
| @@ -333,7 +334,7 @@ reorder() { | |||
| ' "$tempfile" >> "$muttrc" | |||
| } | |||
| while getopts "rfpPXlhodTYD:y:i:I:s:S:u:a:n:x:m:t:" o; do case "${o}" in | |||
| while getopts "rfpXlhodTYD:y:i:I:s:S:u:a:n:P:x:m:t:" o; do case "${o}" in | |||
| l) setact list || exit 1 ;; | |||
| r) setact reorder || exit 1 ;; | |||
| d) setact delete || exit 1 ;; | |||
| @@ -347,24 +348,15 @@ while getopts "rfpPXlhodTYD:y:i:I:s:S:u:a:n:x:m:t:" o; do case "${o}" in | |||
| S) setact add || exit 1 ; sport="$OPTARG" ;; | |||
| u) setact add || exit 1 ; login="$OPTARG" ;; | |||
| n) setact add || exit 1 ; realname="$OPTARG" ;; | |||
| P) setact add || exit 1 ; passprefix="$OPTARG" ;; | |||
| m) setact add || exit 1 ; maxmes="$OPTARG" ;; | |||
| o) setact add || exit 1 ; type="online" ;; | |||
| P) setact add || exit 1 ; type="pop"; protocol="pop3s" ; iport="${iport:-995}" ;; | |||
| p) setact add || exit 1 ; type="pop"; protocol="pop3s" ; iport="${iport:-995}" ;; | |||
| f) setact add || exit 1 ; force=True ;; | |||
| x) setact add || exit 1 ; password="$OPTARG" ;; | |||
| X) setact delete || exit 1 ; purge=True ;; | |||
| t) setact toggle || exit 1 ; cronmin="$OPTARG" ;; | |||
| T) setact toggle || exit 1 ;; | |||
| p) echo "NOTE: Protonmail users must install and configure Protonmail Bridge first for the first sync to work." | |||
| protocol="imap" | |||
| imap="127.0.0.1" | |||
| iport="1143" | |||
| smtp="127.0.0.1" | |||
| sport="1025" | |||
| auth="login" | |||
| tlsline="tls_fingerprint $(msmtp --serverinfo --host=$smtp --port=$sport --tls --tls-certcheck=off | sed -n '/SHA256:/ s/^\s*SHA256:\s*// p')" | |||
| setact add || exit 1 | |||
| ;; | |||
| *) mwinfo; exit 1 ;; | |||
| esac done | |||
+ 3
- 7
mw.1
Wyświetl plik
| @@ -70,6 +70,8 @@ SMTP server port (assumed to be 465 if not specified) | |||
| .TP | |||
| .B -x | |||
| Account password. You will be prompted for the password interactively if this option is not given. | |||
| .B -P | |||
| Pass Prefix. The password will be stored using pass at <passprefix><email> | |||
| .SH OTHER OPTIONS | |||
| .TP | |||
| .B -f | |||
| @@ -80,9 +82,6 @@ Create settings for an account to be used online only without mail syncing abili | |||
| .B -f | |||
| connection will still be attempted in setup to discover mailboxes. | |||
| .TP | |||
| .B -p | |||
| Add a Protonmail account. Protonmail Bridge must be installed and set up. | |||
| .TP | |||
| .B -X | |||
| When removing an email profile with either | |||
| .I -d | |||
| @@ -90,7 +89,7 @@ or | |||
| .I -D, | |||
| also delete the local mail (will not delete the mail on the server). | |||
| .TP | |||
| .B -P | |||
| .B -p | |||
| Use POP protocol instead of IMAP. Requires | |||
| .I mpop | |||
| to download mail after configuration. Server details can still be given with the | |||
| @@ -155,9 +154,6 @@ on mutt-wizard's Github <https://github.com/lukesmithxyz/mutt-wizard> or Gitlab | |||
| .B Gmail accounts | |||
| Google will require you to allow "less-secure" (third party) applications or remove two-factor authentication in order to access their IMAP servers to download your mail. If you use Gmail, be sure to handle this before running mutt-wizard <https://support.google.com/accounts/answer/6010255>. | |||
| .TP | |||
| .B Protonmail accounts | |||
| Protonmail users must use the Protonmail Bridge <https://protonmail.com/bridge/> to access their IMAP and SMTP servers. This too should be configured before running mutt-wizard. | |||
| .TP | |||
| .B Enterprise and university accounts | |||
| Many universities and businesses might host their domain's email via Google or another service. This often requires a special IMAP/SMTP-specific password that you must generate and use. Again, mutt-wizard can handle these systems, but only once they've been set up. | |||
| .TP | |||
+ 4
- 3
share/domains.csv
Wyświetl plik
| @@ -33,6 +33,7 @@ autograf.pl,imap.poczta.onet.pl,993,smtp.poczta.onet.pl,465 | |||
| autoproduzioni.net,mail.autistici.org,993,smtp.autistici.org,465 | |||
| bartender.net,imap.mail.com,993,smtp.mail.com,587 | |||
| bastardi.net,mail.autistici.org,993,smtp.autistici.org,465 | |||
| beaumccartney.xyz,mail.beaumccartney.xyz,993,mail.beaumccartney.xyz,465 | |||
| bguth.de,wp300.webpack.hosteurope.de,993,wp300.webpack.hosteurope.de,587 | |||
| bigpond.com,imap.telstra.com,143,smtp.telstra.com,587 | |||
| bikerider.com,imap.mail.com,993,smtp.mail.com,587 | |||
| @@ -107,6 +108,7 @@ fct.unl.pt,imap.gmail.com,993,smtp.gmail.com,587 | |||
| firemail.cc,mail.cock.li,993,mail.cock.li,587 | |||
| forpsi.com,imap.forpsi.com,993,smtp.forpsi.com,465 | |||
| forthnet.gr,mail.forthnet.gr,993,smtp-auth.forthnet.gr,465 | |||
| freedom.nl,imap.freedom.nl,993,smtp.freedom.nl,465 | |||
| freedom.xyz,imap.nixnet.email,143,smtp.nixnet.email,587 | |||
| fsmpi.rwth-aachen.de,mail.fsmpi.rwth-aachen.de,993,mail.fsmpi.rwth-aachen.de,465 | |||
| fsu-jena,exchange.uni-jena.de,993,smtp.uni-jena.de,587 | |||
| @@ -216,7 +218,6 @@ parabolas.xyz,mail.parabolas.xyz,993,mail.parabolas.xyz,587 | |||
| paranoici.org,mail.autistici.org,993,smtp.autistici.org,465 | |||
| paranoid.email,imap.paranoid.email,993,smtp.paranoid.email,25 | |||
| paranoid.network,imap.nixnet.email,143,smtp.nixnet.email,587 | |||
| pm.me,127.0.0.1,1143,127.0.0.1,1025 | |||
| poczta.fm,poczta.interia.pl,993,poczta.interia.pl,465 | |||
| poczta.onet.pl,imap.poczta.onet.pl,993,smtp.poczta.onet.pl,465 | |||
| polimi.it,outlook.office365.com,993,smtp.office365.com,587 | |||
| @@ -226,8 +227,7 @@ posteo.*,posteo.de,993,posteo.de,587 | |||
| privacy.xyz,imap.nixnet.email,143,smtp.nixnet.email,587 | |||
| privacyrequired.com,mail.autistici.org,993,smtp.autistici.org,465 | |||
| prokonto.pl,poczta.o2.pl,993,poczta.o2.pl,465 | |||
| protonmail.ch,127.0.0.1,1143,127.0.0.1,1025 | |||
| protonmail.com,127.0.0.1,1143,127.0.0.1,1025 | |||
| purelymail.com,imap.purelymail.com,993,smtp.purelymail.com,465 | |||
| pwned.life,imap.nixnet.email,143,smtp.nixnet.email,587 | |||
| qq.com,imap.qq.com,993,smtp.qq.com,587 | |||
| rape.lol,mail.cock.li,993,mail.cock.li,587 | |||
| @@ -294,6 +294,7 @@ uclive.ac.nz,outlook.office365.com,993,smtp.office365.com,587 | |||
| ucsb.edu,imap.gmail.com,993,smtp.gmail.com,587 | |||
| ucsc.edu,imap.gmail.com,993,smtp.gmail.com,587 | |||
| ukr.net,imap.ukr.net,993,smtp.ukr.net,465 | |||
| umbc.edu,imap.gmail.com,993,smtp.gmail.com,587 | |||
| uni-duesseldorf.de,mail.hhu.de,993,mail.hhu.de,465 | |||
| uni-jena.de,imap.uni-jena.de,993,smtp.uni-jena.de,587 | |||
| uni.edu.pe,imap.gmail.com,993,smtp.gmail.com,587 | |||
+ 4
- 2
share/mutt-wizard.muttrc
Wyświetl plik
| @@ -58,8 +58,10 @@ bind index,query <space> tag-entry | |||
| macro browser h '<change-dir><kill-line>..<enter>' "Go to parent folder" | |||
| bind index,pager H view-raw-message | |||
| bind browser l select-entry | |||
| bind pager,browser gg top-page | |||
| bind pager,browser G bottom-page | |||
| bind browser gg top-page | |||
| bind browser G bottom-page | |||
| bind pager gg top | |||
| bind pager G bottom | |||
| bind index,pager,browser d half-down | |||
| bind index,pager,browser u half-up | |||
| bind index,pager S sync-mailbox | |||